Siemens SICAM 7KG85X Manual Download Page 218

Page: 218 / 281

[sc_Internet_options_security, 2, en_US]

Figure 9-22

Enabling JavaScript

•

In the window of the Security tab, select the Internet icon.

•

On the Security tab set Medium-high.

•

Click Apply.

•

Click OK.

Changing the Buffer Mechanism (only for Microsoft Internet Explorer)

NOTE

Only Microsoft Internet Explorer supports the SIGRAPlugin. Other Web browsers, for example Firefox, do
not support the SIGRAPlugin.

The operation of the user interface requires the SIGRAPlugin.
Change the buffer mechanism as follows:

•

Start Microsoft Internet Explorer.

•

Select the Tools menu in the menu bar of the Microsoft Internet Explorer.

•

Select Internet options from the Tools menu.

9.11.2.3

Commissioning and First Steps

9.11 Operation via PC

SICAM, SICAM P850/P855 7KG85X, Manual

217

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Search results

Summary of Contents for SICAM 7KG85X

Reviews:

Siemens SICAM 7KG85X, Manual, Page: 218 / 281

Search results

Summary of Contents for SICAM 7KG85X

Reviews: