manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 163 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 163

Multiple File Download via Internet Explorer

Preparation

i

i

NOTE

The Multiple File Download with Internet Explorer is identical for trend recorder, measurement recorder
and waveform recorder.

For a Multiple file download, prepare as follows:

•

Add the IP address of your device into the Trusted sites in the Internet Explorer

•

Change the Security settings in the Internet Explorer

•

Update the system registry

Adding the IP Address of Your Device into the Trusted Sites

•

Open the Internet Explorer, for example, Internet Explorer 11, and select Tools → Internet Options.

•

In the Security tab, select Trusted sites and click Sites.

[sc_multiple download_sites, 1, en_US]

Figure 7-10

Sites

7.3.4

Display and Other Functions
7.3 File Download

162

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments