Sagem AGORIS M943, User Manual

Page: 27 / 134

MF 5990 - Agoris M943
- 27 -
4 -
Configuring the machine and the services
4 Press MENU to return to the home screen.
Fax reception settings
Print settings for received faxes
Secure printing of received faxes
By default, the machine is configured to print all
documents received automatically.
However, you may configure the machine to keep
confidential faxes in the memory and not print them out
systematically on reception.
To configure secure printing of faxes received:
1 Press MENU .
2 Select SETTINGS > COMMUNICATION > FAX >
RECEPTION > PRINT .
3 Press HELD PRINT .
4 Select the required status from the list. Press OK to
confirm the new setting.
5 Press MENU to return to the home screen.
When secure printing of faxes received is active, users
wishing to recover a document in the memory must
manually force printing from the machine's print queue
(see Printing received faxes in the memory [
51]).
Number of copies
You can print several copies (1 to 99) of documents
received.
To set the number of copies of each document received:
1 Press MENU .
2 Select SETTINGS > COMMUNICATION > FAX >
RECEPTION > PRINT .
3 Press NUMBER OF COPIES .
4 Enter the number of copies to be printed by the ma-
chine for each document received. Press
OK to
confirm the new setting.
5 Press MENU to return to the home screen.
Printing with toner saving
This parameter is used to reduce the quantity of toner
consumed when printing received documents.
To activate toner saving printing:
1 Press MENU .
2 Select SETTINGS > COMMUNICATION > FAX >
RECEPTION > PRINT .
3 Press TONER SAVE .
4 Select the required status from the list. Press OK to
confirm the new setting.
5 Press MENU to return to the home screen.
Emission
speed Emission speed of outgoing
documents.
If the quality of the telephone line is
good (suitable, without echo), calls
are usually made at maximum speed.
However, it may be necessary to limit
the emission speed for certain
communications.
To change the emission speed:
1 Press SPEED .
2 Select the required value from
the list.
3 Press OK to confirm the new
setting.
Anti echo If this function is active, the line echo
in long distance communications will
be attenuated.
To change the status of the Anti echo
parameter:
1 Press ANTI ECHO .
2 Select the required status.
3 Press OK to confirm the new
setting.
Overseas For some long distance calls
(satellites), the line echo may make
communication difficult.
To change the status of the Overseas
parameter:
1 Press OVERSEAS .
2 Select the required status.
3 Press OK to confirm the new
setting.
Number of
call backs Number of attempts to be made by
the machine if emission fails.
To change the number of call backs:
1 Press ATTEMPTS NUMBER .
2 Enter the number of call backs
the machine should make us-
ing the virtual keyboard.
3 Press OK to confirm the new
setting.
Interval
between
call backs Time between two machine call back
attempts.
To change the time between 2 call
backs:
1 Press ATTEMPT TIME .
2 Enter the time between 2 call
back attempts made by the ma-
chine using the virtual key-
board.
3 Press OK to confirm the new
setting.
Parameter Description / Procedure
Note
Some parameters also apply to printing of
received emails.