- 131 -
MF 5990 - Agoris M943
16 -
Characteristics
Recommendations for use
Use envelopes:
•
For laser printers, with diagonal closure, ordinary pre-glued folds, edges and flaps.
•
Approved for laser printing.
•
Dry.
Do not use envelopes:
•
With self-adhesive flaps.
•
With adhesive ribbons, metal attachments, clips or removable strips.
•
With transparent windows.
•
Of thick texture (example: reinforced envelopes).
•
Comprised of fused, volatile, or discolouring material or emitting toxic vapours.
•
Pre-sealed.
Labels
A sheet of labels is comprised of a front side (printable surface) and an adhesive back, covered with a protective film:
•
The front side must meet standard Paper specifications.
•
The front must fully cover the protective side, without allowing any adhesive to show on the surface.
You can print continuous sheets of labels but depending on the media used and the printing environment, paper feed
problems may occur. If so, stop the continuous print and print out sheets one by one.
Before printing on label sheets, it is recommended to print out a test on standard paper to check page formatting. For
more information concerning printing labels, consult your application documentation.
Recommendations for use
Using sheets of labels:
•
Recommended for laser printers
•
Format A4 or Letter (sheets of self-adhesive labels).
Do not use sheets of labels:
•
With easily removed labels or protective film that is unstuck.
•
Allowing adhesive substances to show on the surface.
•
Pre-cut or perforated.
Duplex
Not supported
Note
Envelopes must be printed on the address
side. It is recommended to print outside the
three-play zones (front+back+flap) in order
to avoid printing problems (poorly printed
characters, etc.).
Main and additional paper tray
Secondary paper tray
Capacity
Up to 290 sheets of labels
depending on thickness.
Maximum height 49.4 mm
Up to 100 sheets of labels
depending on thickness.
Maximum height 17.5 mm
Orientation
Print side facing up
Print side facing up
Driver
Labels
Weight
64 to 163 g/m² (17.1 to 43 lb)
Duplex
Not supported
Main and additional paper tray
Secondary paper tray
