MF 5990 - Agoris M943
- 13 -
2 -
Installation
4
Connect one end of the LAN network cable (not
supplied) to the machine port and the other to your
local network port for the machine.
5
Ensure that the On/Off button is on Off (position 0).
6
Connect the mains cable to the machine. Connect
the mains cable to the wall socket.
7
Press the On/Off button to switch the machine on
(position I).
Initial configuration of the machine
After a few seconds, when the printer preheating phase is
complete, the machine initialisation phase starts.
1
Insert the initialisation card provided with the ma-
chine into the smart card reader.
2
Once the analysis phase is complete, remove the
initialisation card from the smart card reader.
In this section, you will find the initial settings to be
configured to be able to use your machine's basic
functions:
•
geographic settings (country, language, communica-
tion network);
•
date / time settings;
•
fax settings (machine name and number);
•
local network settings (automatic configuration of the
Ethernet network);
•
paper settings.
To configure the
geographic
settings:
1
Press the
MENU
key.
2
Press
[OTHER COMMANDS]
>
SETTINGS
>
GENERAL
>
GEOGRAPHICAL
>
COUNTRY
.
3
Select the required country from the list. Use the up
and down arrows to scroll through the available
countries. Press
OK
to confirm the new setting.
>
Choosing the country automatically configures
the machine's default language and the telecom-
munications network.
4
In the navigation path at the top of the screen,
press
GENERAL
to return to the previous menu.
WARNING
The power cable is used to disconnect the
machine from the power supply. As a pre-
caution, the mains power socket must be lo-
cated near the machine and easily
accessible in the event of danger.
Note
This section will help you to first configure
the machine, assuming the use of a direct
telephone line on the PSTN network, and an
Ethernet configuration via a DHCP server
with automatic allocation of IP address.
Consult the section Configuring the
machine and services [
20] if you want to
configure the machine differently.
