- 14 -
MF 5990 - Agoris M943
2 -
Installation
To set the machine's
date and time
:
1
In the menu
GENERAL
, press
DATE AND TIME
.
2
Press
TIME
. Enter the time using the virtual key-
board. Press
OK
to confirm the new setting.
3
Press
DATE
. Enter the date using the virtual key-
board. Press
OK
to confirm the new setting.
4
In the navigation path at the top of the screen,
press
GENERAL
to return to the previous menu.
To set the machine's
number and name
, required for the
fax function:
1
In the menu
GENERAL
, press
FAX
.
2
Press
LINE NUMBER 1
. Enter the number using
the virtual keyboard. Press
OK
to confirm the new
setting.
3
Press
LINE NAME 1
. Enter the machine's name
using the virtual keyboard. Press
OK
to confirm the
new setting.
4
In the navigation path at the top of the screen,
press
SETTINGS
to return to the previous menu.
To run an
automatic configuration of the Ethernet
network
(automatic allocation of the IP address via the
DHCP server):
1
In the menu
SETTINGS
, press
COMMUNICATION
>
LOCAL NETWORK
>
ADDR. ALLOCATION
.
2
Select
AUTOMATIC
from the options available in
the list. Press
OK
to confirm the new setting.
>
The machine will search for a DHCP or BOOTP
server on the local network that can dynamically
allocate its network settings.
>
This operation may take a few minutes.
3
Check that the parameters
IP ADDRESS
,
SUBNET MASK
,
GATEWAY
,
PRIMARY DNS
,
SECONDARY DNS
,
WINS 1 SERVER
et
WINS 2
SERVER
are correctly entered. If this is not the
case, you will have to configure them manually.
4
Press
MENU
to return to the home screen.
To check and / or specify the
paper type and format
in
each paper tray:
1
Press
PAPER
.
2
Press
FORMAT
. Check that the paper format de-
tected in each tray is correctly entered. To correct
a paper format, press on the corresponding tray;
select the required format from the list and press
OK
to confirm.
3
Press
TYPE
. Check that the paper type detected in
each tray is correctly entered. To correct a paper
type, press on the corresponding tray, select the re-
quired paper type from the list and press
OK
to
confirm.
4
Press
MENU
to return to the home screen.
Consult the section Configuring the machine and services
[
20] for more available parameters, and to configure the
machine according to your specific needs.
