manualshive.com logo in svg

Rural King RK19 Hydrostatic, Operator'S Manual, Page: 74 / 156

Share
Download
Rural King RK19 Hydrostatic Operator'S Manual Download Page 74

OPERATION

3 - 5

33

7. dRIvINg ON slOPE

sTARTINg Off ON sTEEP slOPE

①

 Depress the brake pedals.

②

 Place each shift lever in the low 

speed position.

③

 Set the engine at the mid speed 

with the throttle lever.

④

  Release  the  brake  pedal  slowly 

at the same time.

►

After parking, make sure to ap

-

ply the parking brake.
 Avoid parking on a slope if pos

-

sible. If it is absolutely neces-

sary to park on a slope, chock 

the rear wheels.

•

•

wARNINg

⑥

 Remove the key from the switch 

after parking vehicle.

☞  

Refer to the page 2-13 for opera

-

tion of the parking brake.

TIPs fOR dRIvINg ON slOPE

(1) Set  the  main  shift  lever  in  the 

low  speed  position  on  a  slope 

to prevent the engine from stop

-

ping.

(2) Keep the driving speed low on a 

downhill road.

►

When the needle on the coolant 

temperature gauge is pointing 

at 'H,' the engine is overheated. 

If  running  the  engine  under 

this condition continuously, the 

engine parts can be severely 

damaged. Make sure to take an 

appropriate action immediately.

•

NOTE

RK19-영문-03(다).indd   5

2017-05-19   오전 9:45:15

Summary of Contents for RK19 Hydrostatic





























































































































































Reviews:

No comments