manualshive.com logo in svg

Rural King RK19 Hydrostatic, Operator'S Manual, Page: 154 / 156

Share
Download
Rural King RK19 Hydrostatic Operator'S Manual Download Page 154

11

 - 1

WARRANTY

11

RK

COVERAGE

This Limited warranty is limited to RK repairing or replacing, at RK's option, warranted 
parts by an authorized RK RK Tractor store at no charge for either the parts or services. 
Parts replaced under this Limited Warranty are only warranted for the balance of the 

warranty period. 

1. RK shall have no obligation or liability under this warranty.

(1)  for normal maintenance or operation services for Products, including but not limited to, 

providing lubricants, fuel, tune-up inspection or adjustments.

(2)  for any consumable parts when such parts are replaced as a part of normal maintenance or 

operating services.

(3) to any exclusions and limitations contained in the Limited Warranty.

2.  Options, accessories, attachments installed by RK Tractor stores which are not 

manufactured by RK will not be warranted in any way by RK. For information about 
the warranty or to obtain warranty service on such parts, RK Tractor stores should 
contact the manufacturer directly

RK19-영문-11-보증서.indd   15

2017-05-18   오후 6:46:08

Summary of Contents for RK19 Hydrostatic





























































































































































Reviews:

No comments