![background image](http://html.mh-extra.com/html/royal-enfield/continental-gt-650-twin-2018/continental-gt-650-twin-2018_service-training-manual_1494578059.webp)
ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
58
18. Cylinder Barrel removal
Bring both pistons in same height and
slide up barrel carefully then remove
barrel base gasket.
Remove qty. 2 dowel pins.
Suitable plier
if required for
dowel pins
Fastener, Size, Tool Usage, Precautions, Photos
19. Piston LH and RH removal
Remove circlip from one side from LH
piston and slide piston pin by thumb to
take out piston with rings set sub
assembly set.
Similarly follow the above step for RH side
piston.
Expand properly and then remove piston
rings from piston carefully. 1st compression
ring, 2nd compression ring, 3rd set of
three oil scrapper rings pack.
20. Clutch removal
Remove 3 nos. flanged hex bolts (M6 x 35)
from clutch stopper plates, by
simultaneously loosing all three in
sequence.
Remove clutch stopper plate, 3 clutch
return springs as shown in photo.
Internal circlip
plier
10mm Socket
& Rachet
Aggregate to Dismantle Instructions
NOTE
Please mark by
marker pen on
piston LH & RH
to avoid inter
change and
leading to bad
performance.
Summary of Contents for CONTINENTAL GT 650 TWIN 2018
