ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
186
1
2
3
5
4
1
2
3
4
ARM CLUTCH RELEASE ASSLY. POSITION
ARM CLUTCH RELEASE ASSLY. PROCEDURE
To position the Arm Clutch Release, an alignment
mark is provided in RH cover (ref. Image C).
Position the arm clutch release inline with the
alignment mark and assemble the clutch cable
(ref. Image D).
Check whether the clutch free play is between
2 - 3mm.
If the arm position is not close to the line mark
during service, Change the arm position in
serration ref. image A & B.
MICRO RELAYS LAYOUT
NOTE :
The Arm clutch will be on the nearest possible
serration near the marking & on the LH side of the
marking as per above illustration.
Arm Alignment Mark
Image C
Arm positioned inline
with Alignment Mark
Image D
1.
Flasher Relay
1
2. Main Relay
1
3. Pump Relay
1
4. Accessories Relay
1
5. Starter Relay
1
S.No.
Description
Qty.
Accessory Relay
Accessory
Coupler
Fuse Box – Fuse 7
SP - 04
245
Connector 2
ECU
ACCESSORY RELAY CIRCUIT
Summary of Contents for CONTINENTAL GT 650 TWIN 2018
