ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
100
Fastener, Size, Tool Usage, Precautions, Photos
Aggregate to Assemble Instructions
Fig. 5.7.487
Locate and assemble flanged Hex bolt
(M12x1.25x45)
(a)
with thick washer on
magneto rotor on LH and hand tighten
bolt.
Locate and hold special tool
(a)
on gear
starter clutch
(b)
and tighten to specified
torque.
Torque 155 Nm
/15.5 kgf-m
Magneto and Clutch locking tool
PartNo: ST-27533-2
17 mm Socket
with Torque
wrench
Tighten 6 Nos. Hex socket head cap screw
(M6x1x25)
(a)
to specified torque.
5 mm Allen
socket with
Torque wrench
Torque 10 Nm/
1 kgf-m
13. Camshaft Sub-Assembly
Hold the timing chain in stretched
condition and gently rotate crankshaft
clockwise
to bring LH piston to TDC.
Lock the crankshaft in TDC position
through hole in crank web inline with
crankcase RH side using special tool as
shown.
Hold sprocket in position with one of the
slotted holes facing on top.
17 mm Socket
with Ratchet
CAUTION
DO NOT rotate
crankshaft
anti-clockwise.
NOTE
Apply oil (80W 90) 2 ACG rotor bolt
threads & underneath area of bolt.
NOTE
Incase of fixing old timing sprocket please
ensure marked facing properly, otherwise
it may lead to noise in operation / running
condition.
Summary of Contents for CONTINENTAL GT 650 TWIN 2018
