Royal Enfield CONTINENTAL GT 650 TWIN 2018, Service Training Manual

Page: 33 / 198

ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
32
4. Battery

Remove LH side cover top mounting
screw, take out LH side cover, then
disconnect battery negative cable
connection.

Remove battery holding carrier plate
using allen key, slide the battery towards
right side gently to easy the removal of
positive cable from battery before taking
out battery assembly.
Fastener, Size, Tool Usage, Precautions, Photos
5. Connections

Remove the secondary air injection valve
(SAI) solenoid outlet pipe connection.

Remove SAI solenoid mounting top allen
key bolts on the top side of air filter body.
Pull out gently solenoid value from air
filter box.

Remove another end of SAI pipe from
cylinder heads common rail of exhaust
side.
6. Exhaust system

Remove LH and RH Hego (O2) sensor
wiring coupler from wiring harness.

Remove LH and RH exhaust pipe with
silencer assembly from engine. (1st
remove 12mm hex flange nuts from
cylinder head exhaust port, 2nd rear
mounting bolt & nut from pillion rider step
bracket. Finally remove bottom centre
mounting bolt.)
Aggregate to Dismantle Instructions
Negative cable Removal