ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
115
Fastener, Size, Tool Usage, Precautions, Photos
Aggregate to Assemble Instructions
Assemble clutch release spring
(a)
on
shaft with the “L” bend is positioned
against the lug
(b)
in clutch cover.
Rotate clutch shaft
(b)
clockwise till it
stops. Ensure pinch bolt is sufficiently
loose, position clutch release on shaft at
11 ‘O’ clock position and the inner side of
the arm is aligned to the reference mark
(a)
on the clutch cover.
Tighten pinch bolt sufficiently such that
the arm is firmly clamped on the shaft.
Position the upper leg of the spring
against the inside of the clutch release
arm and check for proper spring action.
8 mm Socket
with Ratchet &
Torque wrench
Torque 10 Nm
/1.0 kgf-m
26. Starter Motor
Locate starter motor
(a)
into the upper
crankcase housing
(b)
RH.
NOTE
Do not tap on the starter motor. It may
damage the internal parts.
Inspect the starter driveshaft teeth
for any wear-out or damages.
Locate and install Qty. 2 Nos. flanged Hex
bolts (M6x1x30)
(b)
on stator motor
(a)
.
Summary of Contents for CONTINENTAL GT 650 TWIN 2018
