ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
98
Fastener, Size, Tool Usage, Precautions, Photos
Aggregate to Assemble Instructions
Use angle torque wrench
(a)
to tighten at
specified angle value.
12 mm Socket
with Angle
wrench
1st Torque
15 Nm/1.5 kgf-m
2nd Torque
35 Nm/3.5 kgf-m
Angular Torque 270° (deg)
CAUTION
Torque
and
angle should be
as specified. Do
not provide
over - torque as
it will damage
the bolts.
11. FD Sprocket
Assemble rubber seal on Drive shaft and
ensure it is seated properly on plain bush.
Assemble plain bush
(a)
on Drive shaft
(b)
from smaller end.
Assemble FD sprocket
(a)
on Drive shaft
(b)
.
Angular torque
wrench
Torque Wrench
Install splined washer into driveshaft.
Assemble FD Sprocket nut (M20)
(a)
on
Drive shaft.
NOTE
Champered teeth of sprocket facing
outwards.
Summary of Contents for CONTINENTAL GT 650 TWIN 2018
