ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
182
Tighten
the Screw
using
Screw
driver
Tighten
the Nut as
Specified
Spec
CAUTION :
During Tappet screw setting gap or locking the tappet
nut, do not keep the feeler gauge in between the
tappet screw and valve stem tip.
Fig 1.3
X
REAR WHEEL CUSH RUBBER
Inspect for Cush Rubber deformation.
Inspect & Replace
at every
20,000 Km.
X
The ignition coil is assembled on the frame
underneath the fuel tank.
The ignition coil provides the High tension
voltage to the spark plugs and is
controlled by the ECU.
IGNITION COIL ASSEMBLY
Specification
Primary resistance 2.0 Ohms + 10%
Secondary resistance 13.5 K-Ohms + 105
HT LEAD FOR CRACKS
Inspect for cracks at Every service.
Maintenance Schedule :
Replace at every
40,000 Km
RECONFIRMATION OF TAPPET GAP
After Tappet gap adjustment recheck and confirm as
per specified gap since it is loaded by return spring,
please lift rocker arm by hand and insert specified
feeler gauge for reconfirmation.
Tappet
gap
Spring Loaded
Summary of Contents for CONTINENTAL GT 650 TWIN 2018
