Accura 2300S/2350-1P3FSC User Guide
Chapter 4 Accura 2300S Operation/Setup
ⓒ
2015 Rootech Inc. All Rights Reserved
Page 125
Display Setup
Energy Type
You can select the type of energy
to be displayed on the “
V
·
I
·
P
·
E (Voltage/Current/Power/Energy)
”
measurement screen in the display mode. This setup is unrelated to the Accura 2350-1P3FSC module.
Setup Range
Description
nEt(default)
Net energy (kWh received
–
kWh delivered)
rEc
Received energy
dEL
Delivered energy
Sum
Total energy (received delivered energy)
Controlling the Display Screens of Accura 2350 Modules
This setup screen allows you to control the display screens of all Accura 2350 modules connected to
Accura 2300S to display the same information. The table below is based on Accura 2350-1P3FSC-DIZCT
module.
Setup Range
Description
rot(default)
Displays the following information in sequence (ID
→
Current/Power for each feeder
→
Leakage Current
→
Digital Input)
Id
Displays the module ID
Ph_a
Displays the current/power for the feeder 1
Ph_b
Displays the current/power for the feeder 2
Ph_c
Displays the current/power for the feeder 3
abc
Displays the ZCT leakage current for the
feeders 1-3
1
Enrg
Displays the status of the contact points of 4 digital
Input(DI) channels
2
PSEq
Displays the wiring mode/load direction
Ctr
Displays the CT ratio
Irat
Displays the rated current
1. It is displayed on Accura 2350-1P3FSC-DIZCT module, and information on the feeder 1 is displayed on the basic
module.
2. It is displayed on Accura 2350-1P3FSC-DIZCT module, and information on the feeder 2 is displayed on the basic
module.
LCD Backlight Time
Setup Range
Description
10 - 300 (default 60)
LCD backlight time setup [s]
When the set LCD backlight time elapses after the last button operation, the
LCD backlight brightness is changed to the low setup value to reduce power
consumption.
Summary of Contents for ACCURA 2300S
Page 1: ......
