ROOTECH ACCURA 2300S Manual Download Page 130

Page: 130 / 176

Chapter 4 Accura 2300S Operation/Setup

Accura 2300S/2350-1P3FSC User Guide

Page 130

ⓒ

Button Function

Button

Function

[Display Mode]

Press

Select the display screen with the up/down/left/right arrow

buttons.

[Event Log Mode]

Long Press

Enter the event log mode(the latest event log is displayed).

Press

Select the event log.

Long Press

Move to the latest event log.

Long Press

Exit the event log mode and move to the display mode.

1. When the button is pressed, a beeping sound occurs.

2. Press the button for more than one second. A beeping sound occurs in one second.

Note

If there is no button operation for 10 minutes in the event log mode, the screen automatically returns

to the display mode.

Summary of Contents for ACCURA 2300S














































































































































































Search results

Summary of Contents for ACCURA 2300S

Reviews:

Related manuals for ACCURA 2300S

Brands by name

Popular brands

ROOTECH ACCURA 2300S, Manual

Search results

Summary of Contents for ACCURA 2300S

Reviews:

Related manuals for ACCURA 2300S

Brands by name

Popular brands