ROOTECH ACCURA 2300S, Manual

Page: 142 / 176

Chapter 4 Accura 2300S Operation/Setup Accura 2300S/2350-1P3FSC User Guide
Page 142 ⓒ 2015 Rootech Inc. All Rights Reserved
Step 3: Ethernet Setup of Accura 2300S
Step 3-1 IP, Subnet Mask, and Gateway Setup for Accura 2300S
IP
① Long press
1
SETUP button.
→
Go to setup mode.
② Press Left(<) or Right(>) button to move to 「 IP(IP Address) 」 of 「 NETWORK 」
column.
③ Long press ENTER button.
→
the value that is possible to be changed blinks.
④ Increase or decrease the value of the menu screen by using Up( ＾ ) or Down( ｖ )
button.
⑤ Move to the next(left or right) digit of the value of the menu screen by using
Left(<) and Right(>) button.
⑥ Repeat sub-step ④ , ⑤ until changing the value is complete.
⑦
Long press ENTER button.
→
save the changed value and blink stops.
Subnet Mask
① Move to 「 Sbnt(Subnet Mask) 」 to press Down( ｖ ) button on 「 IP(IP Address) 」
screen.
② Long press ENTER button.
→
the value that is possible to be changed blinks.
③ Increase or decrease the value of the menu screen by using Up( ＾ ) or Down( ｖ )
button.
④ Move to the next(left or right) digit of the value of the menu screen by using
Left(<) and Right(>) button.
⑤ Repeat sub-step ③ , ④ until changing the value is complete.
⑥
Long press ENTER button.
→
save the changed value and blink stops.
Gateway
① Move to the 「 gatE(Gateway) 」 screen by pressing the Down( ｖ ) arrow button on
the 「 Sbnt(Subnet Mask) 」 screen.
② Long press the ENTER button.
→
The value that can be configured blinks.
③ Select the value to configure with the Up( ＾ ) or Down( ｖ ) arrow button.
④ Move to the next(left or right) digit of the value to configure with the Left(<) and
Right(>) arrow buttons.
⑤ Repeat steps ③ and ④ until selecting all digits to configure is complete.
⑥ Long press the ENTER button.
→
Save the changed values, and the screen stops
blinking.
⑦
Long press the ESC button.
→
Exit the setup mode and move to the display
mode.
1. Press the button for more than one second. A beeping sound occurs in one second.