manualshive.com logo in svg

Rohde & Schwarz ZVH-K1, Operating Manual

Share
Download
Rohde & Schwarz ZVH-K1 Operating Manual Download Page 91

R&S ZVH 

Working with the Measurement Wizard 

Using the Measurement Wizard 

Operating Manual 1309.6946.12 - 09 

76 

- 

Skip a measurement ("Skip Meas" softkey). 

Skips a single measurement and initiates the subsequent measurement. 

Skipping individual measurements is possible when you turn on "Allow to skip 
measurements and finish wizard sequence" in the "Wizard Set Editor" of the 
R&S ZVHView software. 

- 

End the measurement sequence ("Finish Wizard" softkey). 

Ends the measurement sequence and returns to the "Measurement Wizard" 
dialog box. The results of the measurements you have already finished are 
kept in the memory of the R&S ZVH. 

Ending the sequence is possible when you turn on "Allow to skip 
measurements and finish wizard sequence" in the "Wizard Set Editor" of the 
R&S ZVHView software. 

- 

Abort the measurement sequence ("Cancel" softkey). 

Aborts the measurement and returns to the "Measurement Wizard" dialog box. 
The results of the measurements you have already finished are lost. 

When you have finished all measurements that are part of the measurement set, the 
R&S ZVH asks you if you want to save the measurement results. 

►  Press the "Save Meas Results" softkey. 

The R&S ZVH saves the results on the selected storage device. 

 

   

 

 

Limited internal memory 

If you have to store the results on the internal memory, make sure that it has enough 
space left to store them. Else the results might get lost. If the space is not enough, you 
can delete old data with the file manager. 

For more information see "

Deleting Datasets

" on page 35. 

 

   

The results for a measurement set consist of a number of files, each file corresponding 
to one of the performed measurements. For easy evaluation, the R&S ZVH includes 
the name of the measurement as defined in the wizard dialog or R&S ZVHView in the 
file name. 

All result files that belong to a measurement set are stored in the same directory. The 
directory is named after the measurement name and site. The syntax is 
'sitename_measurement_#'. 

The R&S ZVH adds numbers in ascending order to files as well as directories if you 
perform a measurement or measurement set more than once.  

Summary of Contents for ZVH-K1



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands