R&S ZVH
Network Analyzer Mode (R&S ZVH-K42)
Evaluating the Results
Operating Manual 1309.6946.12 - 09
196
For the SWR measurement format, instead of selecting one of the predefined ranges,
you can also define the exact top and bottom values of the vertical axis.
► Press the SCALE/AMPT key.
► Press the Range/Ref Pos softkey.
► Select the "Scale Max" or "Scale Min" menu items to define the top or bottom
values of the vertical axis.
The R&S ZVH adjusts the vertical axis accordingly.
6.3.3 Using Markers
The network analyzer mode also features markers. The functionality is similar to that of
the spectrum analyzer.
For more information see "
6.3.4 Working with Channel Tables
The R&S ZVH allows you to use channel tables in network analyzer mode.
► Press the FREQ/DIST key.
► Press the "Signal Standard" softkey.
► Select the signal path you need from the menu.
The R&S ZVH opens the list of channel tables loaded into the R&S ZVH via
R&S ZVHView.
► Select the channel table you need.
The R&S ZVH scans the channel table for the channels with the lowest and
highest frequencies and sets those as the start and stop frequency.
The R&S ZVH already comes with an assortment of channel tables that you can use
without doing anything. If you want to test telecommunications standards that are not
listed, you can also build channel tables manually with the "Channel Table Editor" of
the R&S ZVHView software package that is delivered with the R&S ZVH. To use one
of those, you just have to copy the channel table to the R&S ZVH.
