manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 96

84

Putting the Micropump into Operation

On the Status screen, tap the 

 symbol to restart the 

micropump.

In the Main menu, tap 

Start 

.

Starting or stopping insulin delivery

While the micropump is in STOP mode, the micropump issues the 
“Cancel” signal sequence once an hour to remind you that no 
insulin is being delivered. For more information on the sequences 
of signals, see chapter 

17.3 Signals.

w

 WARNING 

Should you be unable to stop the micropump for any reason, 
remove the micropump from the infusion assembly, or pull the 
infusion assembly’s adhesive pad together with the 
micropump off your skin.

Note

Stopping the micropump cancels all ongoing boluses and the 
Temporary Basal Rate.

or

In the next step, you are prompted to activate the basal rate 
profile. After pressing the insulin button lit up in green to confirm, 
the micropump is set into operation again.

man_07866364001_C_en-UK.indb   84

12.10.2018   13:08:22

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands