Roche Accu-Chek Solo User Manual Download Page 76

Page: 76 / 380

Putting the Micropump into Operation

Insert the cannula assembly
into the insertion device.

Push the cannula assembly
into the slot until you hear it
click into place.

Use the positioning aid to
check whether the cannula
assembly is in the correct
position.

Prime the insertion device by
rotating the priming handle
clockwise in the direction of
the arrow, as far as it will go.

When the insertion device is
fully primed, you will hear a
click.

180°

Remove both parts of the
protective film from the
adhesive pad.

Do not touch the adhesive
surface of the adhesive pad.
This could impair the adhesive
properties.

man_07866364001_C_en-UK.indb 64

12.10.2018 13:08:05

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Search results

Summary of Contents for Accu-Chek Solo

Reviews:

Brands by name

Popular brands

Roche Accu-Chek Solo, User Manual

Search results

Summary of Contents for Accu-Chek Solo

Reviews:

Brands by name

Popular brands