manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 277

265

13

If you do not want to use your micropump for a while, you can 
switch to injection therapy mode. This could be the case, for 
example, if you want to do without your insulin pump while on 
holiday.

Discuss pausing your pump therapy with your healthcare 
professional. Switch to alternative therapy methods only after 
consultation.

When you switch to injection therapy, your diabetes manager 
supports you as follows:

 

j

Bolus advice results are rounded to the increment of your pen.

 

j

You can note down your basal insulin injections in the detailed 
test result and in the logbook entries of the diabetes manager.

 

j

A reminder is available that you can use to be reminded about 
basal insulin injections.

Note

 

j

If you are using bolus advice, carry out the injections in a 
timely fashion and using the dosage you confirmed. If you 
inject a different insulin amount, you should adjust the 
respective logbook entry.

 

j

You should enter any boluses that were delivered 
independently of the diabetes manager using an insulin 
pen or syringe as new data in the logbook.

 

j

Store the micropump and consumables according to the 
permitted ambient conditions. For more information, see 
chapter 

16 Technical Data.

13 

Injection Therapy Mode

man_07866364001_C_en-UK.indb   265

12.10.2018   13:10:13

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands