manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 290

278

Care and Maintenance

1

2

Turn off the diabetes manager 
and close the cover of the USB 
socket and the cover of the 
headphone socket.

Remove any large 
contaminants with a lint-free 
cloth moistened with 
demineralised water.

Be careful not to wipe any dirt 
into the openings on the 
diabetes manager.

14.1.1 Cleaning the Diabetes Manager

Use only demineralised water. Use neither soap nor abrasive 
cleaning agents, as they may cause the screen to become 
scratched. If the screen of the diabetes manager is scratched, it 
may be difficult to read under certain circumstances. In this case, 
the diabetes manager must be replaced.

man_07866364001_C_en-UK.indb   278

12.10.2018   13:10:19

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands