manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 256

244

Changing Settings

1

2

Tap the tile with the desired 
background image.

Tap 

None

 if you do not want to 

have a background image.

Tap 

Done

.

Tap 

Background image

 to set 

the pattern for the background 
of the active screen lock.

Then tap 

Done

.

Changing the background image

7

Enter the PIN again to confirm 
it.

Tap 

OK

.

Note

If you have forgotten the PIN 
you chose, you can unlock 
the diabetes manager with a 
PIN unlock code.
You can find the label with 
the 8-digit PIN unlock code 
on the back cover of the 
User’s Manual.

man_07866364001_C_en-UK.indb   244

12.10.2018   13:10:03

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands