manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 305

293

15

15 

Messages and Troubleshooting

There are different types of messages that the micropump 
system uses to inform you about the status of the micropump 
system, problems or errors. These messages are:

 

j

error messages

 

j

maintenance messages

 

j

warnings

 

j

information messages

The diabetes manager issues messages on the screen and can 
emit tones, vibration signals or both, depending on the setting. In 
addition, the LED of the diabetes manager lights up to signal 
warnings, maintenance messages and error messages.

When the diabetes manager is turned off or in standby mode 
(screen is turned off), the micropump issues messages through 
signals. The micropump does not signal any warnings if it is 
connected to the diabetes manager and the diabetes manager is 
active (screen is turned on).

w

 WARNING 

If you ignore or do not notice the messages from the 
micropump system, there is a risk of hypoglycaemia or 
hyperglycaemia, which may culminate in ketoacidosis.

When a message is displayed, pick up the diabetes manager to 
receive further information and be able to react to the message. 
In the lower part of the display, selection or confirmation buttons 
are displayed. The buttons are briefly deactivated so that you 
cannot inadvertently confirm the message before you have read 
it.

Error and maintenance messages are repeated every 5 seconds 
and cannot be muted. The cause of the error or maintenance 
message must be confirmed and corrected.

Warnings and reminders are repeated every 30 seconds and can 
be muted as often as desired for 5 minutes. Tones and vibration 
signals are stopped for a certain time period. In this case, the 
message remains visible on the screen and the LED lights up.

man_07866364001_C_en-UK.indb   293

12.10.2018   13:10:31

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands