manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 132

120

Delivering a Bolus

Note

 

j

If you do not confirm the acoustic feedback in Step 3 by 
pressing the quick bolus buttons, no bolus will be delivered 
and the “Cancel” signal sequence will sound.

 

j

Enter the insulin and carbohydrate amounts associated with 
the quick bolus in the logbook. Be sure to assign correction 
bolus and meal bolus correctly. Otherwise, subsequent data 
entries in the logbook as well as future bolus advice 
calculations might not be correct.

 

j

For more information on the sequences of signals, see 
chapter 

17.3 Signals.

Example

You want to deliver a quick bolus with 2.5 U:

 

j

With a quick bolus increment of 0.5 U, you have to press the 
quick bolus buttons 5 times to deliver an insulin amount of 
2.5 U.

 

j

Wait approx. 3 seconds to complete the input.

 

j

Check the acoustic feedback of the micropump.

 

j

If the programmed insulin amount is correct, press both quick 
bolus buttons.

 

j

The pump issues the “Execute” signal sequence.

man_07866364001_C_en-UK.indb   120

12.10.2018   13:08:37

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands