manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 205

9

193

Replacing the Pump Base

9.4  Replacing the Pump Base

The pump base can be used for up to 4 months. It must not be 
used for longer than that because otherwise the delivery accuracy 
may be impaired. You will be reminded regularly to replace the 
pump base before the deadline expires. For information on the 
remaining running time of the micropump, see the settings in the 

System information

 menu. If you replace the pump base, you 

must also replace the reservoir.

Before starting this process, have the following components 
ready:

 

j

A new pump base

 

j

A new reservoir assembly

 

j

An insulin vial with U100 insulin

 

j

Disinfectant or a sterile alcohol wipe

Note

 

j

Refer to the information in chapter 

4 Putting the Micropump 

into Operation

.

 

j

When you replace the pump base, all settings saved for the 
pump in the diabetes manager are preserved.

 

j

Each pump base can only be paired once with a diabetes 
manager.

2

Tap 

Replace

.

The micropump switches to 
STOP mode and issues the 
“Cancel” signal sequence.

1

The display for selecting the 
system components appears.

Tap 

Pump base

. The reservoir 

is automatically selected as 
well.

man_07866364001_C_en-UK.indb   193

12.10.2018   13:09:33

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands