Roche Accu-Chek Solo User Manual Download Page 52

Page: 52 / 380

Putting the Diabetes Manager into Operation

Enter a PIN (secret
identification number) of your
choice with 4 to 8 digits.

Choose a PIN that is easy to
remember. Note down the PIN
and keep it in a safe place.

Tap

Entering the PIN

Tap the desired language. If
required, scroll the list
upwards to view additional
languages.

Tap

Save

Setting the language

Press and hold the power
button on the top of the
diabetes manager until the
diabetes manager turns on.

If the diabetes manager is
turned on: Briefly press the
power button to activate the
energy-saving standby mode.

The diabetes manager
vibrates, issues the “Start”
signal sequence, and the
signal LED lights up. The start
display appears briefly.

For more information on the
sequences of signals, see
chapter

17.3 Signals.

Power on/Standby

man_07866364001_C_en-UK.indb 40

12.10.2018 13:07:47

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Search results

Summary of Contents for Accu-Chek Solo

Reviews:

Brands by name

Popular brands

Roche Accu-Chek Solo, User Manual

Search results

Summary of Contents for Accu-Chek Solo

Reviews:

Brands by name

Popular brands