manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 357

345

18

Supplies and Accessories

18.6 Supplies and Accessories

Supplies for the micropump system

 

j

Accu-Chek Solo reservoir assembly

 

j

Accu-Chek Solo cannula assembly and pump holder

 

j

Accu-Chek Solo pump base

 

j

Accu-Chek Solo insertion device

Supplies for the blood glucose test

 

j

Accu-Chek Aviva test strips

 

j

Accu-Chek Aviva control solutions

 

j

Accu-Chek finger pricker

 

j

Accu-Chek lancets/lancet drums

Accessories*/replacement components

 

j

Charging cradle for the diabetes manager

 

j

Carry case/belt pouch for the diabetes manager (Accu-Chek 
carry case)

 

j

Rechargeable battery for the diabetes manager

 

j

Battery door for the diabetes manager

 

j

Charger for the diabetes manager

 

j

USB cable

If you need to replace defective system components or need 
another User’s Manual for the micropump system, contact your 
Customer Support and Service Centre.

For information on the availability of additional Accu-Chek 
products and accessories in your country, contact the responsible 
Customer Support and Service Centre.

w

 WARNING 

 

j

Use only the supplied charger and the associated USB 
cable, or a certified USB charger (for example, a laptop 
certified according to IEC 60950 or an equivalent safety 
standard).

 

j

Use only the rechargeable battery from Roche.

 

j

Use only supplies and accessories from Roche and do 
not modify them. Otherwise, you risk malfunctions of the 
micropump system, incorrect test results and over-
delivery or under-delivery of insulin.

* not available in all countries

man_07866364001_C_en-UK.indb   345

12.10.2018   13:10:39

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands