manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 142

130

Bolus Advice

Terminology for setting bolus advice

Time blocks

Time blocks allow you to divide the day into different time periods 
according to your individual lifestyle.
The target range, insulin sensitivity and carbohydrate ratio can be 
set individually for each time block.

Target range

The target range describes which blood glucose values are 
considered acceptable when fasting or before a meal. The target 
range is specified by the lower and upper BG thresholds. The 
midpoint between the lower and upper BG threshold is 
automatically included in the calculation as the target value.

Insulin sensitivity

The insulin sensitivity defines the insulin amount required to 
lower your blood glucose level by a certain value.

Carbohydrate ratio

The carbohydrate ratio defines the insulin amount necessary to 
compensate for a certain amount of ingested carbohydrates.

Note the following:

Insulin that was not delivered via the micropump system can only 
be taken into account by the bolus advice feature, if you enter it 
in the diabetes manager beforehand.

Note

The diabetes manager cannot correct input errors.

 

j

Warnings are issued for entries that exceed possible limit 
values.

 

j

No warning will be issued for entries that are incorrect yet 
still possible (i.e. within acceptable ranges).

man_07866364001_C_en-UK.indb   130

12.10.2018   13:08:42

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands