manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 374

362

Glossary

Term

Definition

STOP mode

When your micropump is in STOP mode, it does not deliver any insulin. Insulin delivery is only 
stopped if you switch to STOP mode, change the basal rate profile, make settings using a PC or when 
error messages or maintenance messages are issued. Ongoing boluses or temporary basal rates are 
interrupted when the micropump switches to STOP mode.

Target range

The target range describes which blood glucose values are considered acceptable before a meal or 
when fasting. The target range is specified by the lower and upper BG thresholds.

Temporary Basal Rate (TBR)

Temporary increase or decrease in your basal rate profile to match changing insulin needs due to 
increased or decreased activity level, illness or stress.

Time block

Time blocks help you to set the target range and the parameters insulin sensitivity and carbohydrate 
ratio for bolus advice for specific times of day. You can set up a maximum of 8 time blocks.

Time of test

Information on the point in time when a blood glucose result was obtained. The information can be 
stored together with a blood glucose result. When the results are subsequently analysed, either all 
test results can be displayed or only the test results for a specific time of test.

Total daily dose

The total amount of insulin (basal rate plus boluses) delivered in a 24-hour period, beginning at 
midnight.

U100

U100 indicates the insulin concentration. Each millilitre of liquid contains 100 units of insulin 

Unit (U)

Unit of measurement for insulin

Warning

Warnings inform you about situations that require your attention or draw your attention to a possible 
hazardous situation. The micropump system triggers a warning message if an action of your part is 
required in the near future.

man_07866364001_C_en-UK.indb   362

12.10.2018   13:10:42

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands