Roche Accu-Chek Solo User Manual Download Page 187

Page: 187 / 380

175

Creating and Editing a Basal Rate Profile

8.2.4 Deleting a Basal Rate Profile

Tap the basal rate profile you
want to delete (for example,
Profile 3).

Note that the active basal rate
profile cannot be deleted. The
active basal rate profile is
indicated by the

symbol.

The selected basal rate profile
was deleted from the list of
available basal rate profiles.

Tap the symbol in the upper
right corner of the screen.

Tap

Yes

to delete the basal

rate profile.

man_07866364001_C_en-UK.indb 175

12.10.2018 13:09:23

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Search results

Summary of Contents for Accu-Chek Solo

Reviews:

Related manuals for Accu-Chek Solo

Brands by name

Popular brands

Roche Accu-Chek Solo, User Manual

Search results

Summary of Contents for Accu-Chek Solo

Reviews:

Related manuals for Accu-Chek Solo

Brands by name

Popular brands