manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 114

102

Testing or Entering Your Blood Glucose Level

5.1.8  Causes of Implausible Test Results

If the diabetes manager repeatedly displays implausible test 
results or error messages, check the items listed below. If you 
cannot answer the questions with Yes, correct the respective item 
and repeat the test:

 

j

Did you perform the blood glucose test as instructed in the 
User’s Manual?

 

j

Did you wash your hands with warm water and soap and dry 
them thoroughly?

 

j

Did you only apply blood after 

Apply drop

 appeared on the 

screen?

 

j

Did you apply the blood drop immediately after it had formed?

 

j

Did you perform the blood glucose test within the correct 
temperature range?

 

j

Did you use the test strip immediately after removing it from 
the test strip container?

 

j

Are the test strips still valid (see the label on the test strip 
container next to the 

e

 symbol)?

 

j

Did you observe the storage conditions for the diabetes 
manager and the test strips?

 

j

Was the cap on the test strip container always closed tightly?

 

j

Did you observe the sources of error mentioned in the test strip 
package insert?

If you have observed all these items and are still experiencing 
implausible test results or receiving error messages, perform a 
control test. For more information, see chapter 

14.2 Control Test 

of the Diabetes Manager

.

If you are not sure whether the diabetes manager is working 
properly, contact the Customer Support and Service Centre.

man_07866364001_C_en-UK.indb   102

12.10.2018   13:08:29

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands