manualshive.com logo in svg

Roche Accu-Chek Solo, User Manual

Share
Download
Roche Accu-Chek Solo User Manual Download Page 110

98

Testing or Entering Your Blood Glucose Level

Green dot: 
The blood glucose result is 
within the target range for the 
current time block.

Blue dot: 
The blood glucose result is 
above the target range for the 
current time block. 

The blood glucose result does 
not exceed the hyper warning 
limit.

Green

Blue

If the blood glucose result exceeds the hyper warning limit, the 
diabetes manager will issue the W-75 warning before displaying 
the test result. Follow the warning instructions and confirm the 
warning with 

OK

 to go to the blood glucose result.

Blue dot with the additional information 

Hyper

: 

The blood glucose result exceeds the hyper warning limit.

Blue with Hyper

man_07866364001_C_en-UK.indb   98

12.10.2018   13:08:28

Summary of Contents for Accu-Chek Solo





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands