Ricoh D3GF Field Service Manual Download Page 74

Page: 74 / 187

3.Replacement

Remove the HDD [A].



Do not loosen or remove the screws on the HDD covers. Loosening or removing these screws

will break the seal and void the HDD warranty.



Do not touch the HDD with magnetic objects (such as magnetic screwdrivers), and avoid

placing magnetic sensitive items, such as credit cards and employee ID cards, near the HDD.



Place the HDD in an antistatic bag.

For reassembling:

Connect the SATA cable to the "SATA0" connector on the motherboard.



System Software is not included on replacement HDDs. After installing a new HDD, be sure to

install system software [Link to

System Software Installation Procedure

] and patches [Link to

Updates and Patches Installation Procedure



If there is a backup file of the same E-25C unit which was formally created with the Fiery

System Restore feature with bootable option or Fiery Clone Tool, it is possible to restore the

backup file to the new HDD [Link to

Restoring the E-25C System Directly with a USB Flash

Drive and Service Switch

Restore: Transferring Clone Image Files to E-25C

Summary of Contents for D3GF




























































































































































































Search results

Summary of Contents for D3GF

Reviews:

Related manuals for D3GF

Brands by name

Popular brands

Ricoh D3GF, Field Service Manual

Search results

Summary of Contents for D3GF

Reviews:

Related manuals for D3GF

Brands by name

Popular brands