Ricoh D3GF Field Service Manual Download Page 122

Page: 122 / 187

4.System Maintenance

116

Backup/Restore

Overview

In addition to the factory default image file stored on the E-25C HDD, you can create a separate backup

to retrieve customized settings and job information. Backup can be created using Command

WorkStation, WebTools (using Fiery System Restore), or Fiery Clone Tool.

Marks used in this section:

The procedure is also described in the user manual.

The administrator at the customer site may operate this function from WebTools or

Command WorkStation.

For service technician only. The procedure requires service switch operation. The E-25C

HDD will be reformatted before restoring the image file.

Backing up/Restoring the System Settings and Selected Options Only

You can backup/restore the system settings and the selected options with a single backup file from

WebTools or Command WorkStation. [Link to

Backing Up/Restoring the System Configuration and

Selected Settings Only

]

Backing up/Restoring the System Image File with Fiery System Restore

Summary of Contents for D3GF




























































































































































































Search results

Summary of Contents for D3GF

Reviews:

Related manuals for D3GF

Brands by name

Popular brands

Ricoh D3GF, Field Service Manual

Search results

Summary of Contents for D3GF

Reviews:

Related manuals for D3GF

Brands by name

Popular brands