Ricoh D3GF, Field Service Manual

Page: 165 / 187

5.Troubleshooting
159
Printing-7
Suggested action:
1.
Check the DIMM(s) and reseat them to remove any oxidation on the connectors.
2.
Reinstall system software.
3.
Replace the motherboard.
Printing-8
Symptom:
A print job stalls or stops after one or a few pages.
Possible cause:
PostScript or application error
Suggested action:
1.
Cancel the E-25C print job.
2.
If this fails to clear the problem, turn the copier OFF then ON.
Printing-9
Symptom:
A print job stalls or stops after one or a few pages.
Possible cause:
Missing, incorrect, or faulty DIMM(s), or faulty DIMM connections
Suggested action:
1.
Turn OFF the E-25C; check for missing DIMMs and reseat the DIMMs to remove any oxidation
on the connectors.
2.
Replace the motherboard.
Printing-10
Symptom:
Color quality is not consistent
Possible cause:
Problem with the copier
Suggested action:
Test the copier and service, if necessary (see the service documentation that accompanies the
copier).
Printing-11
Symptom:
Color quality is not consistent
Possible cause: