Ricoh D3GF, Field Service Manual, Page: 130 / 187

4.System Maintenance
124
*3: When bootable files (option) are selected, the backed up files can be directly restored on a newly
replaced empty HDD or on an HDD affected of the Fiery system.
*4: Available methods to restore the backup files:
(A) Command WorkStation/ Webtools > Configure > Restore
or Command WorkStation > GENERAL Tab > Tools > Backup & Restore > Restore [Link to Restoring
Backup Files ]
(B) Restoring the E-25C system with Fiery System Restore (WebTools) [Link to Restoring the E-25C
System with Fiery System Restore (WebTools) ]
(C) Restoring the E-25C system directly from the USB flash drive with service switch [Link to Restoring
the E-25C System Directly with a USB Flash Drive and Service Switch ]
(D) Restoring the E-25C system with Fiery Clone Tool [Link to Restore: Transferring Clone Image Files
to E-25C ]
*5: The backup reference file (*.fbf) and Backup data file (*.DAT) are restored, however the following
items are reset to default.

All IPv4 and IPv6 Network settings

WINS and DNS settings

Server Name

Server Domain
Backing Up/Restoring the System Configuration and Selected Settings Only
You can back up and restore the entire E-25C configuration or selected settings. Backing up the
settings creates a configuration file containing the current settings. Restoring the settings does not
require reinstallation of any software.
Accessing the Backup/Restore feature

Either from Webtools or Command WorkStation, go to Configure > Fiery Server > Backup or
Restore.