manualshive.com logo in svg

Ricoh D3GF, Field Service Manual, Page: 132 / 187

Share
Download
Ricoh D3GF Field Service Manual Download Page 132

4.System Maintenance 

126 

 

9. 

Download the Backup reference file (*.fbf) and Backup data file (*.DAT) by clicking the "Download" 

buttons and save them to the HDD on the client PC. 

Restoring Backup Files 

1. 

Go to Configure. [Link to 

Accessing Configure

] 

2. 

Choose Fiery Server. 

3. 

Click Restore. 

4. 

Select backup reference (*.fbf) file and backup data (*.DAT) file from your client PC, and click Next. 

5. 

Select the items to restore and click Restore. 

6. 

When "Restore Completed!" is indicated, click Reboot. 

Backing Up/Restoring the E-25C System with Fiery System Restore 

Fiery System Restore allows you to create a backup of the E-25C system from WebTools for quick 

recovery from problems. The E-25C system includes the operating system, E-25C software, and the E-

25C configuration settings. 

 

You can restore the E-25C either from image files stored on the internal HDD or on a USB flash 

drive. 

 

Fiery System Restore also provides the scheduled automatic backup feature. 

You must log in to the system as a system administrator to use the Fiery System Restore features. 

Summary of Contents for D3GF




























































































































































































Reviews:

No comments