Ricoh Aficio SP C411DN, Software Manual

Page: 214 / 354

Monitoring and Configuring the Printer
202
6
❖
Interface priority configuration
msh> autonet priority “interface_name”
• You can give interface's AutoNet parameter priority.
• Priority settings are available when multiple interfaces are installed.
• wlan can be specified only when the IEEE 802.11b interface is installed.
Note
❒
If an interface is not selected, the current interface connection settings remain
in effect.
Reference
For details about AutoNet, refer to autonet parameters.
bonjour(rendezvous)
Use the “bonjour(rendezvous)” command to display bonjour(rendezvous)-re-
lated settings.
❖
View settings
Bonjour settings are displayed.
msh> bonjour
❖
Bonjour service name setting
You can specify the bonjour service name.
msh> bonjour cname “computer name”
• The computer name can be entered using up to 63 alphanumeric characters.
❖
Bonjour Installation location information setting
You can enter information about the location where the printer is installed.
msh> bonjour location “location”
• Information about location can be entered using up to 32 alphanumeric
characters.
❖
Setting order of priority for each protocol
• diprint
msh> bonjour diprint [0–99]
• lpr
msh> bonjour lpr [0–99]
• ipp
msh> bonjour ipp [0–99]
You can specify the order of priority for “diprint”, “lpr”, and “ipp”. Smaller
numbers indicate higher priority.
Interface name Interface configured
ether Ethernet interface
wlan IEEE 802.11b interface