Ricoh Aficio SP C411DN, Software Manual

Page: 221 / 354

Remote Maintenance by telnet
209
6
❖
Initializing the printer name for each interface
msh>hostname “interface_name” clear “name”
ifconfig
Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet
mask, broadcast address, default gateway address) for the printer.
❖
View settings
msh> ifconfig
❖
IPv4 Configuration
msh> ifconfig “interface_name” “parameter” “address”
• If you did not enter an interface name, it is automatically set to the Ethernet
interface.
• wlan can be specified only when the IEEE 802.11b interface is installed.
The following explains how to configure an IPv4 address 192.168.15.16 on
Ethernet interface.
msh> ifconfig ether 192.168.15.16
❖
IPv6 Configuration
msh> ifconfig ether inet6 “interface_name ” “prefixlen”
The following explains how to configure a IPv6 address to 2001:DB8::100 with
prefix length 64 on the Ethernet interface.
msh> ifconfig ether inet6 2001:DB8::100 64
❖
Netmask configuration
msh> ifconfig “interface_name” netmask “address”
The following explains how to configure a subnet mask 255.255.255.0 on Eth-
ernet interface.
msh> ifconfig ether netmask 255.255.255.0
❖
Broadcast address configuration
msh> ifconfig “interface_name” broadcast “address”
❖
Changing the Interface
msh> ifconfig “interface” up
• You can specify either the Ethernet interface or IEEE 802.11b interface
when using the optional IEEE 802.11b interface unit.
Interface name Interface configured
ether Ethernet Interface
wlan IEEE 802.11b Interface