Ricoh Aficio SP C411DN, Software Manual

Page: 204 / 354

Monitoring and Configuring the Printer
192
6
When Using IPP with SmartDeviceMonitor for Client
When using IPP with SmartDeviceMonitor for Client, note the following:
• The network printer can only receive one print job from SmartDeviceMonitor
for Client at a time. While the network printer is printing, another user cannot
access it until the job is finished. In this case, SmartDeviceMonitor for Client
tries to access the network printer until the retry interval expires.
• If SmartDeviceMonitor for Client cannot access the network printer and times
out, it will stop sending the print job. In this case, you should cancel the paused
status from the print queue window. SmartDeviceMonitor for Client will
resume access to the network printer. You can delete the print job from the
print queue window, but canceling a print job printed by the network printer
might cause the next job sent from another user to be incorrectly printed.
• If a print job sent from SmartDeviceMonitor for Client is interrupted and the
network printer cancels the job because something went wrong, send the
print job again.
• Print jobs sent from another computer do not appear in the print queue win-
dow, regardless of protocol.
• If various users send print jobs using SmartDeviceMonitor for Client to net-
work printers, the printing order might not be the same as that in which the
jobs were sent.
• An IP address cannot be used for the IPP port name because the IP address is
used for the SmartDeviceMonitor for Client port name.
• When setting SSL, a protocol for encrypted communication, under environ-
ment which server authentification is issued, enter “https://(printer's ad-
dress)/”. Internet Explorer must be installed on your computer. Use the
highest version. Internet Explorer 6.0 or higher is recommended.
• If the [ Security Alert ] dialog box appears when accessing the printer using IPP
to create or configure an IPP port, or when printing, install the certificate. To
select the certificate store location when using Certificate Import Wizard,
click
[ Place all certificates in the following store ] , and then click [ Local Computer ]
under [ Trusted Root Certification Authorities ] .