Ricoh Aficio SP C411DN, Software Manual

Page: 235 / 354

Remote Maintenance by telnet
223
6
Note
❒
Specify “on” to enable Job Spool, or “off” to disable it.
❖
Resetting Job spool setting
msh> spoolsw clear job {on | off}
• When the printer power is cut during job spooling, this determines wheth-
er to reprint the spooled job.
❖
Protocol configuration
msh> spoolsw diprint {on | off}
msh> spoolsw lpr {on | off}
msh> spoolsw ipp {on | off}
msh> spoolsw smb {on | off}
msh> spoolsw ftp {on | off}
msh> spoolsw sftp {on|off}
• You can specify the settings for diprint, lpr, ipp, smb and sftp.
ssdp
Use the “ssdp” command to view and configure SSDP settings.
❖
View settings
msh> ssdp
❖
Setting effective time
msh> ssdp profile {1801–86400}
The default is 10800 seconds.
❖
Advertise packet TTL settings
msh> ssdp ttl {1–255}
The default is 4.
ssh
Use the “ssh” command to view and configure SSH settings.
❖
View settings
msh> ssh
❖
Data compression communication settings
msh> ssh compression {on|off}
The default is “on”.
❖
SSH/SFTP communication port setting
msh> ssh port {22, 1024–65535}
The default is 22.