Ricoh Aficio SP C411DN, Software Manual

Page: 40 / 354

Preparing for Printing
28
1
H
Click [ LPR Port ] , and then click [ Next > ] .
I
Enter the printer's IPv4 address in the [ Port Name ] box, and then click [ OK ] .
J
Check that the name of the printer whose driver you want to install is se-
lected, and then click
[ Next > ] .
K
Change the printer name if you want, and then click [ Next > ] .
Select the [ Yes ] check box to configure the printer as default.
L
Specify whether or not to share the printer, and then click [ Next > ] .
M
Specify whether or not to print a test page, and then click [ Next > ] .
N
Click [ Finish ] .
The printer driver installation starts.
Note
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
❒
A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003)
Important
❒
Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒
In an IPv6 environment, you cannot use the LPR Port. Use the SmartDevice-
Monitor port.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [ OK ] .
The default interface language is English.
D
Click [ PostScript 3 Printer Driver ] .
Add Printer Wizard starts.
E
Select [ My Computer ] , and then click [ Next > ] .