Ricoh Aficio SP C411DN, Software Manual

Page: 336 / 354

Appendix
324
11
Using AutoNet
If the printer IPv4 address is not assigned by a DHCP server automatically, a
temporary IPv4 address starting with 169.254, which is not used on the network,
can be automatically selected by the printer.
You must change this setting to “on” to use AutoNet.
Note
❒
The IP address assigned by the DHCP server is given priority over that select-
ed by AutoNet.
❒
You can confirm the current IPv4 address on the configuration page.
❒
For more information about the configuration page, see p.148 “Interpreting
the configuration page”.
❒
When AutoNet is running, the NetBIOS name is not registered on the WINS server.
❒
The printer cannot communicate with devices that do not have the AutoNet
function. However, this printer can communicate with Macintosh computers
running Mac OS X 10.2.3. or higher.
Reference
See p.201 “autonet”.
Configuring the WINS Server
The printer can be configured to register its NetBIOS name with a WINS server
when the power is turned on. This enables the NetBIOS name of the printer to be
specified from SmartDeviceMonitor for Admin even in a DHCP environment.
This section explains configuring the WINS server.
Note
❒
The WINS server is supported with Windows NT 4.0 Server Service Pack 4 or
higher, and Windows 2000 Servers WINS Manager.
❒
For details about the WINS server settings, see Windows Help.
❒
If there is no reply from the WINS server, the NetBIOS name is registered by
broadcast.
❒
The NetBIOS name can be entered using up to 13 alphanumeric characters.
Using Web Image Monitor
A
Start a Web browser.
B
Enter “http://(printer's address)/” in the address bar to access the printer
whose settings you want to change.
Top Page of Web Image Monitor appears.
C
Click [ Login ] .
The dialog box for entering the user name and password appears.