Ricoh Aficio SP C411DN, Software Manual

Page: 44 / 354

Preparing for Printing
32
1
D
Click [ PostScript 3 Printer Driver ] .
Add Printer Wizard starts.
E
Click [ Next > ] .
F
Click [ Network Printer ] , and then click [ Next > ] .
G
Click [ Browse ] .
H
Double-click the computer name you want to use as a print server in the
[ Browse for Printer ] window.
I
Select the printer you want to use, and then click [ OK ] .
J
Check the location of the selected printer is shown, and then click [ Next > ] .
K
Change the printer name if you want, and then click [ Next > ] .
Select the [ Yes ] check box to configure the printer as default.
L
Specify whether or not to print a test page, and then click [ Finish ] .
M
Restart the computer.
Note
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
❒
A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows 2000)
Important
❒
Installing a printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
❒
If you print from a print server connected to the printer using the SmartDevice-
Monitor port, the client cannot use Recovery Printing and Parallel Printing.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [ OK ] .
The default interface language is English.