27.9 Wi-Fi troubleshooting
Aspects of the installation can cause problems with the data shared between wireless devices. Such problems, their possible causes and
solutions are described here.
Problem
Possible causes
Possible solutions
Ensure that Wi-Fi is enabled on the multifunction display (
Homescreen: >
Set-Up > System Settings > Wireless Connections > Wi-Fi > On
).
Ensure that the “Wi-Fi” option is enabled on the iPhone (available from
the phone's Settings menu).
No wireless connection.
Tablet / smartphone does not have a
wireless connection established with the
multifunction display.
Ensure that the Raymarine connection is selected as the W-iFi network. If a
passcode has been specified for the multifunction display's Wi-Fi connection
ensure that the same passcode is entered into the iPhone when prompted.
Download the required Raymarine app from the relevant application store.
Tablet / smartphone does not have
Raymarine app installed and running.
Start the Raymarine app on your device.
No Raymarine app on device
Mobile applications are NOT enabled on
the multifunction display.
Enable “Viewing only” or “Remote Control” (
Homescreen: > Set-Up >
System Settings > Wireless Connections > Mobile Apps
).
Device not compatible with Raymarine
app
Recommended device requirements:
• iOS Devices = Best performance achieved on iPhone 4 or later and
iPad 2 or later.
• Android/Kindle Fire = Best performance achieved with 1GHz processor
and better and running 2.2.2. or later.
Raymarine app runs slowly or not at all.
MFD software incompatible with mobile
application
Ensure your MFD contains software application version 3.15 or later.
Download the “Navionics Marine” app from the relevant app store.
Smartphone / tablet does not have
“Navionics Marine” app installed and
running.
Start the “Navionics Marine” app on the device.
No waypoint / routes synchronization with
Navionic Marine app.
Chart application is not running on the
multifunction display.
Start the chart application on the multifunction display.
Weak or intermittent Wi-Fi signal.
Interference from other wireless devices
in the vicinity.
Multiple wireless devices running simultaneously (such as laptops, phones,
and other wireless devices) can sometimes cause wireless signal conflicts.
Temporarily disable each wireless device in turn until you have identified
the device causing the interference.
Smartphone / tablet can no longer connect
to the internet or receive e-mails after
using a Raymarine mobile app.
Device still connected to the multifunction
display.
Ensure the access point on your device is switched back to your previous
access point (e.g. the marina Wi-Fi).
282
New a Series / New c Series / New e Series
Summary of Contents for A65
