Raritan PARAGON II Series User Manual Download Page 63

Page: 63 / 258

Chapter 4: Front Panel Display and Controls

Press the

ESC

button on the front panel at any time to return to Normal

Display.

Test User UST1

This function checks whether user stations (USTs) are functioning
properly.

1. Press

the or button to change user port number. Display will read

"OK", "None", or "Failed."

If a "Failed" condition is detected, make sure the Cat5 UTP cable is

installed properly and secured, or try using another user station
(UST) to see if the user station under test has become defective.

2. Press

the

ESC

button on the front panel at any time to return to Normal

Display.

Test Chan. UKVM

This function checks whether a CIM is functioning properly.

1. Press

the or button to change channel number. Display will read

"OK", "None", or "Failed."

If a "Failed" condition is detected, make sure the Cat5 UTP cable is

installed properly and secured, or try using another CIM to see if
the CIM under test has become defective.

2. Press

the

ESC

button on the front panel at any time to return to Normal

Display.

Stacking Support

1. Press

the or button to set the Stacking Unit ID number (0~3 for a

P2-UMT832M or 0~1 for a P2-UMT1664M).

The default is set to "0" (no Stacking Units connected).

If you wish to add Stacking Units, this number must be equal to the

number of Stacking Units connected.

Summary of Contents for PARAGON II Series


































































































































































































































































Search results

Summary of Contents for PARAGON II Series

Reviews:

Related manuals for PARAGON II Series

Brands by name

Popular brands

Raritan PARAGON II Series, User Manual

Search results

Summary of Contents for PARAGON II Series

Reviews:

Related manuals for PARAGON II Series

Brands by name

Popular brands