Chapter 2: Quick Start
12
Plug one end of a stacking cable into the port—Expansion Port
Out—on the Stacking Unit.
Plug the other end of the cable into the port—Expansion
Port—on the Main Unit.
b. For connecting P2-UMT1664S to P2-UMT1664M:
Plug one end of the stacking cable into "Expansion Port Out A"
on the Stacking Unit and the other end of the cable into the
lower "Expansion Port In" on the Main Unit.
Plug one end of the other stacking cable into "Expansion Port
Out B" on the Stacking Unit and the other end of the cable into
the upper "Expansion Port In" on the Main Unit.
4. (Optional) You can cascade up to three P2-UMT832S Stacking Units
for a P2-UMT832M Main Unit. To add more Stacking Units, follow this
procedure:
a. Plug one end of a stacking cable into the port—Expansion Port
In—on the last Stacking Unit connected to the Main Unit.
b. Plug the other end of the cable into the port—Expansion Port
Out—on the newly added Stacking Unit.
c. Connect a power cord to the newly added Stacking Unit.
d. Repeat Steps a to c if you want to add one more Stacking Unit.
5. Turn on all Paragon II devices.
6. Set the total number of connected Stacking Units on the front panel of
the Main Unit.
a. Press
the
FUNC
button to activate the Function Menu.
b. Press
the and buttons to select "Stacking Support."
c. Press
the
ENT
button to confirm your selection.
d. Press
the and buttons to select the total number of Stacking
Units—3 maximum for P2-UMT832M or 1 maximum for
P2-UMT1664M.
e. Press
the
ENT
button to save the setting.
7. Set a unique Stacking Unit ID on the front panel of each Stacking Unit.
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
